First write-up, bear with me. I'm doing this simple and straightforward, nothing too complex, it's written in plain English. I'm still working on this post should be done when I get back tonight, but I'll leave it posted up for people to get started on.
Before Pictures:
After Pictures:
1. Introduction:I'm not a professional painter , nor do I claim to be, I'm just posting this because this is what worked for me and it came out ok.So some people have seen my car in real life, noticing it's primed. I barely used enough, only 8 cans, yes I was going to do more to the prime stage, but figured it was temporary, this is just something for everyone to note that even you can come out with a decent rattle can job (if done right).
I re-primered my AE86 because the original prime was coming off, and some light surface rust. I'll show you what you can do to take this off.
I'll go through what you need and what is important, first off, I estimated I spent around $250 or less on all the materials, not sure to be exact but it was quite cheap. Yes you can take your car to Maaco but they don't do prep work, priming your car is a great thing to do before taking it to someone like them.
People who ask why I did this, it's because the state the car was in. It needed a re-prime. I'm writing this up for anyone who unfortunately has the same condition paint that I did.
Depending on your budget, you may go higher or lower, this is just what I found that worked. I don't have pictures of the materials I used (it's all in the garage, I'm lazy to take pics) so just make reference of what the stuff looks like and what fits your needs.
Under each section I posted what you need for that job just in case you forget. This should help you out if you are confused.
Note on Bondo:I am not covering bondo as my car has no dents and/or bondo'd areas from the previous owner. I originally wanted to use some in light areas, but decided against it, bondo can crack and when used some people tend to over-do it and use it like a sculpting tool. Really trashy. In an ideal world I would weld metal to the body.
